Latest Products https://www.auditoriumworks.in Latest Products Thu, 13 Dec 2018 12:19:30 +0530 en-us https://www.auditoriumworks.in Acoustic Beam Panels https://www.auditoriumworks.in/acoustic-beam-panels-supplier.htm https://www.auditoriumworks.in/acoustic-beam-panels-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Acoustic Wall & Ceiling Panels https://www.auditoriumworks.in/acoustic-wall-ceiling-panels-supplier.htm https://www.auditoriumworks.in/acoustic-wall-ceiling-panels-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Acoustic Sliding Doors https://www.auditoriumworks.in/acoustics-sliding-doors-supplier.htm https://www.auditoriumworks.in/acoustics-sliding-doors-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Typical Sliding Door ApplicationsOur engineered solutions offer a wide range of applications and environments including : Anechoic chambers – guaranteed acoustically controlled environments Automotive test cells Education Engine test facilities (vehicle/component anechoic and semi-anechoic test rooms, “shake and rattle” and hot engine test facilities Factories Hospitals Loading bays Research centres Studios Theatres Utilities (power generation and water pumping stations) Our header and casing system is fitted to frame the door opening and accommodates horizontal-slide or vertical-slide opening doors. Horizontal sliding doors require minimal headroom above the doorway opening and minimal projected space into the room.AVA’s sliding door designs offer numerous flexible combinations : Sound reduction to Rw56dB Fire rating Sizes to suit from personnel access to doors in excess of 15m wide Specialist door drives Control and seal systems A wide range of finishes – timber cladding, aluminium, stainless steel and multi coloured polyester powdered paint One button activation, minimal maintenance and long life All AVA acoustic doors are of a superior acoustic specification and can be made fire resistant. Additional features include manual override or battery-powered back up to ensure user access during power outages. Maintenance contracts are available where required. Acoustic Partitions https://www.auditoriumworks.in/acoustic-partitions-supplier.htm https://www.auditoriumworks.in/acoustic-partitions-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Vibration Isolators https://www.auditoriumworks.in/vibration-isolators-supplier.htm https://www.auditoriumworks.in/vibration-isolators-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Insulated Floating Floor https://www.auditoriumworks.in/insulated-floating-floor-supplier.htm https://www.auditoriumworks.in/insulated-floating-floor-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Benefits : Fabricated, non-cast isolator housings permit flexible product and system design that maximizes application opportunities for any slab thickness, air cavity, and/or load options. Spring isolator natural frequencies (fn) of 3.13 Hz for 1″ rated deflection springs and 2.21 Hz for 2″ rated deflection springs. Other rated deflection springs available. In-field acoustical testing yielded results of FIIC 72, FSTC 61 for a vented (non-vented floors can yield higher FSTC values) floating floor. Spring/neoprene cup combination improves performance against low-frequency noise. Proven effective for vibration isolation applications ranging from floors for sensitive lab measuring equipment (e.g., metrology and surgical labs) to sports floors over retail/commercial spaces. Factory installation and/or supervision available. Dance Floors https://www.auditoriumworks.in/dance-floors-supplier.htm https://www.auditoriumworks.in/dance-floors-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Acoustic Louvers https://www.auditoriumworks.in/acoustic-louvers-supplier.htm https://www.auditoriumworks.in/acoustic-louvers-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Details : Fresh air intakes for ventilation systems Mechanical equipment screens Noise attenuation solutions for roof top plant rooms Acoustic barriers and screens Process air intakes Cooling tower inlet attenuators and screens   Acoustic Enclosures https://www.auditoriumworks.in/acoustic-enclosures-supplier.htm https://www.auditoriumworks.in/acoustic-enclosures-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Applications : There are many applications for acoustic enclosures and acoustical enclosures. For example, products are often used for sound dampening with manufacturing equipment, power generation devices, air conditioning systems, and refrigeration equipment. Acoustic enclosures are also used for noise attenuation with compressors, blowers and fans. Some acoustic enclosures are portable and light-weight. Others are designed to be fixed in one place. Typically, these permanent structures contain acoustic ceiling tile, acoustic wall tile, and acoustic foam. Personnel shelters, observation rooms, and control rooms are examples of larger structures. Acoustic Panels https://www.auditoriumworks.in/acoustic-panels-supplier.htm https://www.auditoriumworks.in/acoustic-panels-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Q: How many acoustic panels do I need in my room? A: Our solution is a great tool to find the right answer for any room. You provide some information about the room dimensions and surfaces, and our system crunches the numbers for you.   Q: Where should I place the panels in the room? A: In general, where you place the panels in the room is not critical. A visually pleasant appearance is often the guiding factor in placement. The most important thing is simply to get the total square footage of panels into the room somewhere. No matter where you place them, the panels will soak up the extra sound that is bouncing off every surface in the room. That said, we do have a couple of non-critical guidelines for acoustic panel placement. First, you get more absorption per square foot of panel when the panel is placed in or near a corner. Said another way, you’ll need slightly fewer panels in your room if you place some of them in or near corners. Second, if there is a primary source of sound in the room, such as speakers at one place in the room, it’s a good idea to place panels at first reflection points. These are places where the sound can come from the source, bounce once, and reach the listener. For example, on the side walls of a listening room approximately midway between the listener and the speakers. This is because sound that reaches the listener after traveling an indirect path arrives just a little later than sound that came directly. This means your brain has to sort out multiple copies of the same sound, making things sound less clear and making speech more difficult to understand. Adding panels at the first reflection points reduces the late-arriving sound so your brain can focus on one clear copy of the sound.   Q: I need to keep sound from going through my apartment walls (or through a window, or from coming in from the street). Will your panels do that? A: No, our panels won’t do that, but we carry some products that might help. What you need is acoustic isolation (keeping sound from one area isolated from another area). My (owner Mark Aardsma’s) two pieces of advice on isolation are : Make it airtight. Get rid of gaps under doors, etc. Even a small gap will let a lot of sound through. This makes a big difference. If you make it airtight you’ll reduce mid and high frequency sounds, but still have muffled low frequency sounds coming through. Seal those big gaps with weatherstripping, plywood over openings, etc. For small gaps, especially during new construction and remodeling, we also carry Green Glue Noiseproofing Sealant that’s great for sealing cracks where sound gets through. Make it rigid and decoupled. Low frequency sound (bass) requires rigid surfaces to bounce it off so it doesn’t come through. Concrete walls are great, but I realize you can’t just pour one in your living room. Heavy plywood over a window, double-layer sheetrock on a wall, anything that adds stiffness and weight to your sound barrier will help keep those low frequencies out. Decoupled means when you vibrate one side of the wall, it doesn’t transmit the vibration through to the other side. This is accomplished with shock absorption in between. This is where sound isolation products come in. See our Sound Isolation Materials category for clips that decouple drywall from studs, and Green Glue Noiseproofing Compound that goes between layers of drywall to greatly reduce the amount of sound that is transmitted. And remember, airtight first, rigid and decoupled second.   Q: Is the 2-inch or the 4-inch panel thickness best for me? A: The answer depends on three things : Budget: The 2-inch panels cost a little less to buy and half as much to ship. The total difference is Rs 350/- to Rs 1000/- per panel. Purpose: If you are concerned about bass absorption the 4-inch panels perform 4 times as well as the 2-inch panels at 125Hz. However, the two thicknesses perform equally well at 500Hz and above. Preference: Some people like the look of the thinner panels better on the wall, some don’t. Some like to “go with the best” just to be on the safe side. Both thicknesses work very well to reduce reverb, ringing, and unwanted reflections in your room. The 4-inch panels will do more to even out the bass in the room, but they are not true bass traps and they will not absorb much below 100Hz. For serious bass absorption (50 to 125Hz), check out our Corner Bass Traps.   Q: Can I order custom size panels to fit my situation? A: Yes, we can supply both our 2 inch and 4 inch thick panels in custom sizes. For a quick price quote just give us a call toll-free at xxxxxxxxxxxx and let us know the length and width you need.   Q: Do your panels release dust or fibers into the air? A: We find that the fabric we use to cover the panels does a good job keeping any dust or fibers from escaping. We haven’t had any trouble with that.   Q: How are the panels normally attached to the wall? A: Our panels come with our professional installation kit containing special aluminum clips, anchors, and screw for neat and secure installation on drywall, wood, or concrete walls.   Q: How about mounting panels on a ceiling? A: Sure, not a problem. You can mount your panels with our Or, if this is a DIY job, some customers will drill small pilot holes (from the back through to the front edge of the panel) and put screws through those holes and into the ceiling (preferably into a joist or other solid structure). The edge frame of the panel is solid and will support screws without a problem. Others will use screw eyes and/or screw hooks in the back of the panel and in the ceiling, sometimes with sections of wire to suspend the panels a couple of inches or more below the ceiling. The hooks and eyes can also be hooked together, or held together with small cable ties. The 24x48x2 inch panels weigh 10.5 pounds each, and the 24x24x2 inch panels weigh 5 pounds each, so there’s not a lot of weight to support. If you are working with a drywall ceiling, be sure to use suitable drywall anchors anywhere you are screwing something to the drywall. Of course, whatever method you choose, use your common sense to make sure the panels are securely attached.   Q: Why do the panels have a solid wood back? A: The 1/4″ wood back provides strength for the panel, and makes it easy to hang the panels on the wall, or attach hardware such as hinges, hooks, or other hangers. Acoustically, the solid back against the wall is about the same as the panel with no back against the wall. Either way the sound enters the front of the panel, is reflected by the back and/or wall, and exits through the front again. Where the back can be undesirable is if you are trying to absorb bass and you want an air gap behind the panel. This air gap is to allow the sound to travel through the panel, some distance in the air gap, reflect from the wall, back through the air gap, and back through the panel. That distance is helpful in absorbing low frequencies (because they have long wavelengths). Most of our customers mount our panels against the wall for broadband absorption and control of reverb, and this works very well. We have had the panels absorption tested (solid back and all) by Riverbank Acoustical Laboratories and they rate very highly. See the test results on our 4-inch panels for the absorption coefficients at various frequencies. Our 4-inch panels are available with fabric-covered open backs. If you plan to install your panels across a corner or spaced away from the wall for an air gap, we recommend that you select the open back option when adding the panels to your shopping cart. This option is not available in 2-inch panel construction.   Q: How is mineral wool different than fiberglass absorption material? A: There is very little difference. Mineral wool is made from basalt rock that is melted and spun into wool. Fiberglass wool is made from silicon rock (glass) that is melted and spun into wool. The mineral wool has a higher melting point, but that has no effect on the acoustical properties. Mineral wool and fiberglass of similar densities have nearly identical acoustical properties.   Q: What’s the difference between rigid fiberglass board (like Owens Corning® 703) and Sound Attenuating Fire Batts (SAFB)? A: There are no significant differences in acoustical properties (how they absorb sound). There are two significant differences in physical/mechanical properties. Density. SAFB has a density (weight) of 2.5 pounds per cubic foot, which is the most cost-effective density for absorbing sound. Higher densities absorb sound only slightly better, so they are not worth the extra cost of material in most cases. 703 is the Owens Corning rigid fiberglass board product and is commonly used for sound absorption. It has a similar density at 3.0 pounds per cubic foot, and nearly identical acoustical properties to SAFB. Rigidity. SAFB is a thick batt, like a heavier version of common household insulation batts. Rigid Fiberglass board is manufactured as a relatively rigid board that holds it’s shape.   Q: What is your Art Panel Policy? A: Artwork for all art panels must be received by us and proofs approved by the customer within 30 days of placing the order, unless other prior written arrangements are made. Art panels are non-refundable once production on them has begun. Acoustic Doors https://www.auditoriumworks.in/acoustic-doors-supplier.htm https://www.auditoriumworks.in/acoustic-doors-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Standard, High Performance Acoustic Doors : AVA acoustics offer doors from stock or custom made alternatives. Whether you need steel, EN1634-1 fire rated or sliding acoustic doors, we are world leaders and have a solution for almost all markets and applications.Custom Design Acoustic Doors : At our global headquarters we can incorporate custom design and laser cut for precision finishing and assembly. Again, EN1634-1 fire rated safety standards work alongside high performance acoustics and architectural finesse. Our custom designed and produced CAM Lift Hinges mean we incorporate flat thresholds into door design, thus no obtrusive floor seals or trip hazards. Computer aided / Laser design gives us flexibility to manufacture and install to your brief with no impact on noise reduction. Multi finishes are available. AVA Market sectors : Solving noise control and sound issues by up to Rw70dB we supply sound reducing solutions to the following markets : Architectural Airport Services Broadcasting Building Services Education Entertainment and Leisure Healthcare Industry Law Enforcement Manufacturing Power Generation Typical Acoustic Door Applications Acoustic Windows https://www.auditoriumworks.in/acoustic-windows-supplier.htm https://www.auditoriumworks.in/acoustic-windows-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Features : STC Rating Up To 45 Custom Sized To Fit Your Needs Extra Large Units Available With Mullions Frames Available In Clear Anodized Or Bronze Anodized Optional Tinted, One-Way Mirror Pane, Safety Glass, Etc. 4° Angled Glass For Max Acoustical Performance – Optional Flat Glass  Configuration   Window Specifications : 1″ Insulated Glass Unit With 2 Pieces of 1/4″ Laminated Glass 4-1/2″ Aluminum Frame Angled Glass For Maximum Acoustical Performance Acoustically Treated Frames & Seals Class A-1 ASTM E-84 Nonflammable Sound Silencer™ Acoustical Frame Insert Fits Any Wall Thickness By Insetting Or Offsetting Acoustical Window HVAC Sound Attenuators https://www.auditoriumworks.in/hvac-sound-attenuators-supplier.htm https://www.auditoriumworks.in/hvac-sound-attenuators-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 BDER Sound Absorbers https://www.auditoriumworks.in/bder-sound-absorbers-supplier.htm https://www.auditoriumworks.in/bder-sound-absorbers-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Lighting Controls https://www.auditoriumworks.in/lighting-controls-supplier.htm https://www.auditoriumworks.in/lighting-controls-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 DMX Software https://www.auditoriumworks.in/dmx-software-supplier.htm https://www.auditoriumworks.in/dmx-software-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 DMX Dimming Panels https://www.auditoriumworks.in/dmx-dimming-panels-supplier.htm https://www.auditoriumworks.in/dmx-dimming-panels-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Computer Based Lighting Controllers https://www.auditoriumworks.in/computer-based-lighting-controllers-supplier.htm https://www.auditoriumworks.in/computer-based-lighting-controllers-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 DMX Controller https://www.auditoriumworks.in/dmx-controller-supplier.htm https://www.auditoriumworks.in/dmx-controller-supplier.htm Tue, 24 Jul 2018 00:00:00 +0530 Auditorium Sitting Chairs https://www.auditoriumworks.in/auditorium-siting-chairs.htm https://www.auditoriumworks.in/auditorium-siting-chairs.htm Fri, 17 Aug 2018 00:00:00 +0530 Auditorium Works manufacturing and supplying of a massive range of utmost quality Cinema Auditorium Chairs. Made using advanced technology, these are assured of premium quality. Highly comfortable in their characteristics, the offered products are widely preferred. Committed to the satisfaction of our revered clients, we further ensure the cost-effectiveness of the chairs we offer.Features:» Durable» Comfortable» Adjustable seat height» Low maintenance